Atd Tools ATD-8160 1/4 Carbide Burr Set, 8 Pc.

• Special automotive selection of 8 most-used 1/4e carbide burrs.
• Hinged wooden storage box included

Linear Actuator, Rated Load 27 lb., Stroke Length 11-13/16 In., Speed @ Rated Load 78 in./min., Duty Cycle 20 Percent, Voltage 12VDC, 2.5 Full Load Amps, Retracted Length 16 In., Max. Ambient Temp. -25 Degrees C/150 Degrees F, Enclosure Type IP66, Motor Type Permanent Magnet, Thermal Protection None, Capacitor Included No, No Capacitor Required, No Feedback Signal, Limit Switch Type Internal Non Adjustable, Clutch Included No, Drive System Type Gear, Screw Type Acme, Nut Material Delrin

Features

• Limit Switch Type: Internal Non Adjustable
• Mounting Type: Clevis
• Thermal Protection: None
• Clutch Included: No
• Stroke Length: 11-13/16"
• Max. Ambient Temp.: -25 Degrees C/150 Degrees F
• Capacitor Required: No
• Enclosure Type: IP66
• Standards: CE
• Retracted Length: 16"
• Dimension B: 0.79"
• Capacitor Included: No
• Full Load Amps: 2.5
• Item: Linear Actuator
• Screw Type: Acme
• Duty Cycle: 20%
• Housing Material: Zinc Die Cast Aluminum
• Dimension G: 4"
• Seal Guide Material: Delrin
• Dimension F: 0.7"
• Motor Type: Permanent Magnet
• Speed @ Rated Load: 78 in./min.
• Voltage: 12VDC
• Rated Load: 27 lb.
• Nut Material: Delrin
• Drive System Type: Gear
• Feedback Signal: No
• Dimension D: .25"

• Item Type: Linear Actuator
• Brand: DUFF-NORTON
• Manufacturer Part Number: LT25-1-300

Hole Cutter Kit 7/8" to 2-1/2"

Adjustable Leveler with Stud, Material Neoprene, Length 3-3/16 In., Width 3-3/16 In., Height 7/8 In., Design Low Profile, Thread Size M12, Bolt Length 5 In., Package Quantity 4

Features

• Item: Adjustable Leveler with Stud
• Material: neoprene
• Thread Size: M12
• Height: 7/8"
• Design: Low Profile
• Width: 3-3/16"
• Length: 3-3/16"
• Bolt Length: 5"

• Item Type: Leveling Mnt
• Brand: AIRLOC
• Manufacturer Part Number: 1.0075.50
• Made in the United States

Windshield Wiper Motor

Windshield Wiper Motor; Front;

Omix-Ada is the world's largest independent manufacturer and wholesale only company with a full line of Jeep parts and accessories. With over 16,000 Jeep parts in stock, with a retail value over $30 million, we are the company behind almost all Jeep parts retailers and warehouse distributors in USA and over 50 countries worldwide. Moreover, Omix-Ada is the top business partner to many Jeep parts retailers, warehouse distributors, installers and Internet merchandisers in the USA and around the globe.

In addition to powering the expanding system of 18V cordless tools and accessories, Makita 18V batteries can help you keep warm in cold, harsh job site conditions. The 18V LXT cordless heated jacket has a power source that accepts Makita 18V LXT and 18V compact Lithium-Ion batteries for up to 35 hours of heat (with 6.0 Ah battery, sold separately). You can also keep your portable electronic devices charged-up with the convenient on-board USB power port. The heated jacket has three heat settings to adjust to changing weather conditions and five core heat zones (left chest, right chest, back, and both pockets) for optimum heat distribution. With four pockets, including a zippered chest pocket, left and right side pockets, and a sleeve pocket. A battery pocket is on the rear-left side, so it's out of your way but within reach for quick and easy access. The black heated jacket features polyester shell for increased wind and water resistance, stretchy side panels for increased mobility, and a soft fleece interior for increased warmth. The adjustable cuffs have a hook and loop closure for convenience and added comfort provide a better fit to help keep the cold weather outside.