The Makita 6-1/2 in. Plunge Cut Circular Saw delivers precise and accurate cutting, even close to the wall (11/16 in.) and a splinter-free, mirror finish. Driven by a powerful 12 Amp motor, it has soft start for smooth start-ups and a plunge release lever for comfort. Ergonomically ed, rubberized handles also add to the comfort and give you more control of the saw, too. A large (1-7/16 in.), rear dust port directs debris away from you and easily connects to a vacuum.
Includes circular saw; 6-1/2 in., 48-tooth carbide tipped blade; hex wrench and interlocking tool case
Electronic speed control maintains constant speed under load for smooth cutting
Variable speed control dial (2000 – 5200 RPM) lets you match the speed to the application
Built-in current limiter helps prevent motor burnout
Large cutting capacity (2-3/16 in. at 90 Degrees and 1-9/16 in. at 45 Degrees )
Easy-to-set depth adjustment with large scale
Bevel capability (-1 Degree to 48 Degree) with positive stops at 22.5 Degree and 45 Degree
Magnesium components deliver a well-balanced and lightweight saw at only 9.7 lbs.
Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts
Precise bevel cutting as the position of the blade enters the material on the same cutting line whether cutting straight or bevel
Locking lever holds blade in position so that a wrench can be inserted through the hole in blade case for easy blade installation
1-year warranty
California residents
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “12 Amp 6-1/2 in. Plunge Circular Saw” Cancel reply
The Makita 6-1/2 in. Plunge Cut Circular Saw delivers precise and accurate cutting, even close to the wall (11/16 in.) and a splinter-free, mirror finish. Driven by a powerful 12 Amp motor, it has soft start for smooth start-ups and a plunge release lever for comfort. Ergonomically ed, rubberized handles also add to the comfort and give you more control of the saw, too. A large (1-7/16 in.), rear dust port directs debris away from you and easily connects to a vacuum.
Includes circular saw; 6-1/2 in., 48-tooth carbide tipped blade; hex wrench and interlocking tool case
Electronic speed control maintains constant speed under load for smooth cutting
Variable speed control dial (2000 - 5200 RPM) lets you match the speed to the application
Built-in current limiter helps prevent motor burnout
Large cutting capacity (2-3/16 in. at 90 Degrees and 1-9/16 in. at 45 Degrees )
Easy-to-set depth adjustment with large scale
Bevel capability (-1 Degree to 48 Degree) with positive stops at 22.5 Degree and 45 Degree
Magnesium components deliver a well-balanced and lightweight saw at only 9.7 lbs.
Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts
Precise bevel cutting as the position of the blade enters the material on the same cutting line whether cutting straight or bevel
Locking lever holds blade in position so that a wrench can be inserted through the hole in blade case for easy blade installation
1-year warranty
California residents
The 40V max XGT Brushless Rear Handle 10-1/4 in. Circular Saw (GSR02Z) provides cordless convenience, while taking on high-demand applications. The Makita-built brushless motor delivers 4,000 RPM for faster cutting than corded. It cuts 4X the material in a single pass with an extra large cutting capacity of 3-3/4 in.. This saw is ideal for framers, builders, roofers, forming, and more. The GSR02Z offers 56-degrees bevel capacity with positive stops at 22.5-degrees and 45-degrees and a bevel up to 56-degrees. The saw features an electric brake for maximum productivity and a die-cast magnesium base. Automatic Torque Drive Technology adjusts cutting speed under load for optimum cutting performance. The saw is also equipped with Makita's Extreme Protection Technology (XPT), is a series of integrated seals ed to improve a tool's operation in harsh conditions by channeling water and dust from key internal components. XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the competition.
OUTPOWER: Makita-built brushless motor delivers 4,000 RPM for up to 2X faster cutting than corded
OUTSMART: The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh jobsite conditions
Extra Large 3-3/4 in. cutting capacity at 90锟斤拷; cuts 4X material in a single pass
Up to 150 cuts per charge in 4x4 SPF lumber on a single charge of a 4.0Ah battery (battery not included)
Bevel angle up to 56o, with positive stops at 22.5o and 45o
Ergonomic weighs only 13.3 lbs.; up to 3.2 lbs. lighter than corded
Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
Electric brake for maximum productivity
Auto-start wireless System (AWS) utilizes Bluetooth technology for wireless on-off communication between the tool and dust extractor
AWS capable with Auto-start Wireless Transmitter (part no. 198901-5) sold separately
Die-cast magnesium base, blade guard, and blade cover for a lighter weight durable
Onboard offset wrench for faster blade changes
Retractable, extra-wide tool hook secures the tool when not in use
The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
XGT Tools and Batteries are ed with a multi-layer contact interface for more constant power delivery to take on high-current demands
XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (battery not included)
The XGT Rapid Charger with dual-fan circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)
California residents
This brushless cordless 4-1/2 in. circular saw comes with 1 blade, rip fence, dust port adaptor and blade change key. The DCS571 features a bevel gear allowing users to cut 2X material at 90锟斤拷 and 1X material at 45锟斤拷. With convenient on-board blade key storage users can change blades with minimal hassle. Elongated handle optimizes reach for rip cutting OSB and plywood. With the DCB205, you can cut up to 339 lin. ft. of 3/4 in. OSB. Battery and charger sold separately.
Brushless motor allows you to cut up to 339 lin. ft. of 3/4 in. OSB using DCB205 battery (sold separately)
Removable auxiliary handle for increased control
Hang hook for increased convenience
On-board blade key storage for hassle blade changes
1-1/2 in. finger trigger allows users to choke-up on tool if necessary for their application
Bevel gear allows users to cut 2X material at 90锟斤拷 with a 4-1/2 in. blade
Electronic blade brake stops blade quickly for safety and productivity
Bevel lever gives user the ability to bevel at 45锟斤拷 to cut 1X dimensional lumber
On-board dust port for dust control
DCB230C same runtime and power in a lighter, shorter package compared to DCB200
DCB230C 33% more runtime than DC9096 18-Volt battery
DCB230C 22% lighter (1.06 lbs.) than DCB200
DCB230C no memory and virtually no self-discharge for maximum productivity and less downtime
DCB230C 3 LED fuel gauge to quickly check state of charger on battery
DCB230C part of the 20-Volt Max system
DCB230C 3.0 Amp hour capacity
DCB230C diagnostics with LED indicator for battery charge status of charged, charging, power line problem, replace pack or battery temperature problem
DCB230C charges DEWALT 12-Volt to 20-Volt Max lithium-ion batteries
RIDGID introduces the 18V OCTANE Brushless Cordless 7-1/4 in. Circular Saw with 18V Lithium-Ion 4.0 Ah Battery. The OCTANE Brushless 18V 7-1/4 In. Circular Saw features a high performance brushless motor and advanced electronics that provide best-in-class power and intelligence. While providing increased performance with all RIDGID 18V batteries, OCTANE tools provide maximum performance in high demand applications when paired with OCTANE batteries (batteries not included). Paired with an OCTANE battery (batteries not included), this tool gives 30% more power. The included 4.0 Ah battery is compact to reduce user fatigue and is compatible with all RIDGID 18V Tools and Chargers. With registration, this tool is backed by the Industry's Only Lifetime Service Agreement: Parts. Service. For LIFE. The OCTANE Brushless 7-1/4 in. Circular Saw includes a 7-1/4 in. blade, blade wrench, vacuum attachment, dust chute, rafter hook, an 18V Lithium-Ion 4.0 Ah Battery, and operator's manual. Charger sold separately.
Brushless 7-1/4 in. Circular Saw: Industry leading 2-11/16 in. depth of cut
Brushless 7-1/4 in. Circular Saw: RIDGID OCTANE Brushless 18V 7-1/4 in. Circular Saw delivers 30% more power than the previous brushless unit (R8653B) when paired with an OCTANE Battery
Brushless 7-1/4 in. Circular Saw: The dust chute and included vacuum adapter cuts back on jobsite clean up
Brushless 7-1/4 in. Circular Saw: With the integrated accessory rail, users can attach the included rafter hook for additional storage options
Brushless 7-1/4 in. Circular Saw: LED light engages with trigger for a more direct and clearer line of sight
Brushless 7-1/4 in. Circular Saw: Offers up to 56锟斤拷 beveling cuts for added versatility
4.0 Ah Battery: Compact size and lightweight
4.0 Ah Battery: Compatible with all RIDGID 18V Chargers and Tools
Compatible: Works with all RIDGID 18V Batteries, Tools, and Chargers
Lifetime Service Agreement with registration within 90 days of purchase
The DCS570 provides the end user with the power and depth of cut they receive in a corded circular saw with the portability and convenience of cordless. DEWALT brushless motor technology delivers excellent performance and runtime. Ideal for cross cutting 2x material and ripping sheet goods.
Power - brushless motor provides 5200 RPM maintaining speed under load
Runtime of 330 crosscuts in 2x4 (pine)
Capacity - 7-1/4 in. blade provides 2-9/16 in. cutting capacity at 90锟斤拷
Ease of use - bevel capacity up to 57锟斤拷 for increased versatility
Cross cutting 2x material
Ripping sheet goods
Includes blade and wrench
DCB205-2CK 20-Volt MAX 5.0Ah XR battery X2, provides up to 10 Amp hours of capacity
DCB205-2CK charges all 12-Volt, 20-Volt and 60-Volt MAX batteries at a 4 Amp charge rate
DCB205-2CK kit includes a soft bag for additional tool storage
DCB205-2CK batteries come with a 3-year service warranty
DCB205-2CK 3-LED fuel gauge system for immediate feedback on the state of charge
DCB205-2CK no memory and virtually no self-discharge for maximum productivity and less downtime
DCB205-2CK lightweight and portable battery at only 1.4 lbs.
DCB205-2CK charges DEWALT 12-Volt to 20-Volt MAX lithium-ion batteries
DCB205-2CK charges in 1-hour or less to help minimize downtime
DCB205-2CK 1 DCB205 5.0 Ah batteries, 1 DCB115 charger, soft bag included
California residents
Our most powerful tools just got better with the 60-Volt MAX 7-1/4 in. circular saw with electric brake. It has up to 47% more power than the DCS575 60-Volt MAX circular saw with 2456 unit watts out. With a no-load speed of 5800 RPM, this saw delivers the power of a corded circular saw with the portability and convenience of cordless through revolutionary DEWALT FLEXVOLT technology. The DEWALT 20-Volt Max Lithium-Ion 1/2 in. High Torque Impact Wrench DCF889B with Detent Pin (Tool-Only) is ed for mechanical contractors, plumbers, automotive mechanics, maintenance and repair professionals and remodelers who demand a tool for difficult fastening applications, such as driving and removing fasteners or nuts and bolts in wood, metal and concrete.
Up to 47% more power vs the DCS575
Uses a 7-1/4 in. circular saw blade and features a maximum cut depth of 2-9/16 in. at a 90锟斤拷 bevel
Maximum bevel capacity of 57锟斤拷 with bevel stops at 22.5锟斤拷 and 45锟斤拷
Electric brake stops the blade after the trigger is released
Integrated LED for increased visibility and cut accuracy
Integrated rafter hook for quick and easy storage
DCF889B 400 ft./lbs. of maximum torque to perform a wide range of heavy-duty fastening applications
DCF889B ergonomic handle for superior comfort and control
DCF889B variable speed trigger with electric brake for added control
DCF889B LED light with 20-second delay provides greater visibility when working in dark areas
DCF889B durable magnesium gear case and all-metal transmission for extended durability
DCF889B battery fuel gauge indicator provides end-users with the level of charge available in the pack
DCF889B 20-Volt Max lithium-ion batteries offer longer tool run time and enhanced durability
DCF889B other batteries and chargers sold separately, compatible with DCB200 and DCB201 batteries and DCB101, DCB119 and DCB103 chargers
DCF889B 3-year limited warranty, 1-year service contract, 90-day money back guarantee
Reviews
There are no reviews yet.